VIPEDIA-12 Products – Installation Guide
U-0641-0344.docx – Issue: 8 complete, approved
Page 10 of 52
3 Unpacking and Handling
1. Observe any markings or warnings on the package prior to handling and opening.
Check the equipment package for signs of damage during transport. Report problems to the carrier or
supplier.
3. Unpack the equipment in a dry area, handling the equipment with care.
Check the equipment package contents for completeness. Report any missing items immediately.
VIPEDIA-12 package contents:
• 1 x VIPEDIA-12 product (fitted with handles and any factory fit items)
• 2 x WAGO cage clamp terminals (2-way)
It is advisable to retain the original equipment packing (containers and materials) in the event that the
equipment ever needs returning for service.
If the packing is not to be retained, the packing materials should be either recycled or disposed of
according to local regulations.
Ensure that the name and address of the Authorised Distributor from whom you purchased the product
is recorded on the “Service and Warranty” page of this document for future reference.
8. Repacking instructions are provided in Section “11 Packing for Return” (page 51).
To Next Page
Loading...