ASL INTERCOM VIPEDIA-12 User Manual

VIPEDIA-12 Products – Installation Guide
U-0641-0344.docx – Issue: 8 complete, approved
Page 35 of 52
7.3.1.9 BOA01 - Aggregating Audio Input (up to 4) Connections
Field Connection
Connection to VIPEDIA-12
(via CAT5 patch lead)
Screw Terminal
①
From
external
power supply
Description Signal Pin
Not applicable
(Connected to screw terminal
③ via the PCB.)
+V supply input (18 – 40 V) / 500 mA 24 V 1
+V supply input (18 – 40 V) / 500 mA 24 V 2
0 V supply 0 V 3
To/From
external
device
Screw Terminal
②
BOA01’s RJ45
(see page 25)
VIPEDIA-12’s
RJ45
(see page 16)
Description Signal Pin RJ45 Pin T568B RJ45 Pin
Balanced audio input 1+ AUDIO IN+ 1
⑤
1 WH/OR
⑫
Any
available
I/P
1
Balanced audio input 1- AUDIO IN- 2 2 OR 2
Balanced audio input 2+ AUDIO IN+ 3
⑥
1 WH/OR
⑫
Any
available
I/P
1
Balanced audio input 2- AUDIO IN- 4 2 OR 2
Balanced audio input 3+ AUDIO IN+ 5
⑦
1 WH/OR
⑫
Any
available
I/P
1
Balanced audio input 3- AUDIO IN- 6 2 OR 2
Balanced audio input 4+ AUDIO IN+ 7
⑧
1 WH/OR
⑫
Any
available
I/P
1
Balanced audio input 4- AUDIO IN- 8 2 OR 2
Screw Terminal
③
Not applicable
Description Signal Pin
Cable screen SCREEN 1
DC supply output (18 – 40 V) SUPPLY+ 2
Cable screen SCREEN 3
DC supply output (0 V) 0V 4
Cable screen SCREEN 5
DC supply output (18 – 40 V) SUPPLY+ 6
Cable screen SCREEN 7
DC supply output (0 V) 0V 8

An external DC power supply (18 – 40 V) must be connected to screw terminal ① if the external device is to be
powered from the screw terminal block
③.

ASL INTERCOM VIPEDIA-12 Specifications

General

Brand	ASL INTERCOM
Model	VIPEDIA-12
Category	Stereo System
Language	English