55
Press ENTER to confirm and delete the selected step or EXIT to cancel and return to
the Setup Tests screen.
4.3.4. Prompt
The Prompt function allows you to insert a short line of text in a step. The Prompt will
appear on the screen before the step is initiated and remain on the screen until the
TEST button is pressed. After the TEST button is pressed, the Prompt will clear and
the step will initialize. Use the up and down arrow keys to scroll the highlighted area
to the step where you would like to insert the text prompt and press the “Prompt” soft
key. The Prompt screen will now be displayed. The Prompt screen will appear as
follows: