8
1.5. Key Features of OMNIA II
800 x 480 color TFT display (30% larger than the
OMNIA 1 series) makes setting up test files,
viewing results and performing tests easier than
ever. Color coded test steps clearly indicate
pass/fail conditions. Choose from 4 color
schemes.
Personalize menu settings with the My Menu
interface. Create shortcuts to your favorite
screens and preferences.
Perform simultaneous hipot and ground bond
tests.
MULTIPLE LANGUAGE
SETTINGS
View the menu in English or Chinese.
Users can link a total of 10,000 test steps in any
configuration.
SmartGFI™ disables the instrument’s output
voltage in less than 1 millisecond if excessive
leakage to ground is detected. If enabled,
SmartGFI™ automatically detects if the DUT is
floating or grounding and turns ON or OFF
accordingly. SmartGFI trip current value
adjustable from 0.4 – 5.0mA.
FOUR WIRE MEASUREMENT
(KELVIN METHOD) AND
MILLIOHM OFFSET
CAPABILITY IN THE
GROUND BOND MODE
The four-wire measurement technique factors out
test lead resistance, making measurements more
accurate. The Milliohm Offset features allows the
operator to factor out additional lead and fixture
resistance.
Allows the operator to self-verify the instrument’s
failure detectors.
OMNIA II is now available with 500VA output
capability for AC hipot testing. Models 825x
include this feature.
OMNIA II models 8207/8257 come standard with
a 500VA AC power source for use with RUN and
LCT tests.
To Next Page
Loading...
Need help?
General
