110
5.2 Firmware Restoration
Firmware Restoration is used on an ASUS Wireless Router that
failed during its fi rmware upgrading process. It uploads the
fi rmware that you specify. The process takes about three to four
minutes.
IMPORTANT: Launch the rescue mode on the router before using
the Firmware Restoration utility.
NOTE: This feature is not supported on MAC OS.
To launch the rescue mode and use the Firmware Restoration
utility:
1. Unplug the wireless router from the power source.
2. Hold the Reset button at the rear panel and simultaneously
replug the wireless router into the power source. Release the
Reset button when the Power LED at the front panel fl ashes
slowly, which indicates that the wireless router is in the rescue
mode.
To Next Page
Loading...
Need help?
General