111
3. Set a static IP on your computer and use the following to set up
your TCP/IP settings:
IP address: 192.168.1.x
Subnet mask: 255.255.255.0
4. From your computer’s desktop, click
Start > All Programs > ASUS Utility GT-AC5300 Wireless
Router > Firmware Restoration.
5. Specify a fi rmware fi le, then click Upload.
NOTE: This is not a fi rmware upgrade utility and cannot be used on
a working ASUS Wireless Router. Normal fi rmware upgrades must be
done through the web interface. Refer to Chapter 4: Confi guring
the Advanced Settings for more details.
5.3 Setting up your printer server
5.3.1 ASUS EZ Printer Sharing
ASUS EZ Printing Sharing utility allows you to connect a USB
printer to your wireless router’s USB port and set up the print
server. This allows your network clients to print and scan fi les
wirelessly.
To Next Page
Loading...
Need help?
General