23. Remove the lower hose restraints to allow the
hoses to be pulled through the chassis. (fig. 9-25)
24. Pull the hoses up through the chassis opening and
lay them aside as shown (both sides). (fig. 9-26)
25. Disconnect the wiring running through the hose
passageway and pull it through the opening as
shown. (fig. 9-27)
26. Remove the bolts securing the metal tank restraint
straps, them remove them from the machine.
(fig. 9-28)
27. Slide the quick attach and test port tubes forward
so that they do not interfere with the reservoir
(tank) moving upwards in the chassis. (fig. 9-29)
28. Slide the various control hoses to the side of the
reservoir (tank) so that they do not interfere with
the tank moving upwards in the chassis. (fig. 9-30)
9-6
Rubber Track Loader
9. Hydraulic Reservoir
9-26
9-25
9-27
9-28
9-29
9-30
To Next Page
Loading...
