ASV RT-75 - Introduction; 1.1 Product Identification (PIN); 1.2 Introduction; 1.3 Safety Alert Symbol

1 INTRODUCTION
2
1.1 Product Identification (PIN)
The machine PIN is located on the identification plate, found on the left side of the
operator enclosure.
Please state the model of the machine and PIN when making inquiries in regards
to parts, service, or warranty.
1.2 Introduction
Thank you for purchasing an RT-75 / RT-75HD Compact Track Loader. We are
confident that the machine you have chosen will provide excellent performance
and efficient operation.
The information contained in this manual is intended to provide the operator with
all necessary information for the proper use of the machine.
It is imperative that this manual be provided to the end user at the time of pur-
chase, prior to operation and kept with the machine at all times. If lost or dam-
aged, contact your dealer immediately to obtain a replacement prior to resuming
operation.
The operator is responsible for the safe operation of the machine.
The operator must read, understand and obey the instructions in both this
and the AEM safety manual for skid steer and compact track loaders prior
to operating or performing maintenance or service on the machine.
Should you need clarification or further explanation of the topics in this manual,
please contact your dealer immediately for assistance.
Information describing special equipment or attachments and their operation are
not included in this manual.
This manual should be stored in the provided manual storage location in the cab
of the machine.
1.3 Safety Alert Symbol
The safety alert symbol is used to alert you to potential personal injury
hazards. Obey all safety messages that follow this symbol to avoid
possible injury or death.
RT-75 / RT-75HD US O&M
0405-073 2020-07