Glass Door / Glass Rear Window / Glass Side Screen Escape:
1.Remove the red escape tool from the
stowed position (up and to the right
of the operator). Pull to separate it
from the black key ring / blade guard
(fig. 4.13-3)
2.Press the blunt, spring loaded end of
the tool against the glass panel with
a clear escape route (near an edge or
corner of the pane is preferred).
Press firmly until the tool releases
and snaps the end forcefully into the
glass to break it. Repeat until glass
breaks, then escape to safety (fig.
4.13-4).
Cut Seatbelt:
1.Remove the red escape tool from the
stowed position (up and to the right
of the operator). Pull to separate it
from the black key ring / blade guard
(fig. 4.13-3)
2.Slide the seatbelt into the razor
equipped interior slot in the tool and
pull the tool through the seatbelt to
cut it, freeing yourself (fig. 4.13-5).
3.Escape to safety using the most
appropriate method listed above.
To Next Page
Loading...
