Atag XL75W User Manual

96
Errors
(UURUFRGHVDQGIDXOW¿QGLQJ
Cascade
Cascade master boiler
The cascade master display shows all
errors that are known on the bus, so
also from all slave boilers as from zone
clip-in, solar manager, etc.
Cascade slave boiler
Shows only an error that is active on
the slave boiler itself.
Error on cascade master from a
slave boiler.
Error on the master itself.
Error on a slave boiler itself.
Message on display (no indication of BHE0 and BHE1
Fault Code
engine 1
Fault Code
engine 2
(if applicable)
Overheat 101 1
Overheat 101 2
(Reserved) --
(Reserved) --
Flow Check 1 1P1 1
Flow Check 1 1P1 2
Flow Check 3
1P2 1
Flow Check 3 1P2 2
Flow Check 4 1P3 1
Flow Check 4 1P3 2
Flow Check 2 104 1
Flow Check 2 104 2
Flow Check 5 107 1
Flow Check 5 107 2
ALERT
01/01/15 00:00
Fault 110 1
Boiler Slave 1
Send probe damaged
Fault 110 1
Boiler (local)
Send probe damaged
ALERT
01/01/15 00:00
ALERT
Fault 110 1
Boiler Slave (local) 1
Send probe damaged

Atag XL75W Specifications

General

Brand	Atag
Model	XL75W
Category	Boiler
Language	English