Program Home and Local
Area Codes
You can program this telephone to recognize one Home and
up to four Local Area Codes. (See Glossary on page 3
for definitions.) The Home Area Code must be programmed
in order to dial numbers in call history and to transfer
numbers from the call history to the directory.
By programming these specific area codes, the unit will be
able to distinguish a local call from a long distance call and
will dial the appropriate number of digits.
NOTE: If you must dial the area code to place
calls within your own area code, enter 000 for the
Home Area Code and enter your area code as a
Local Area Code.
1.
Press E to begin feature setup.
2.
Press - until the screen display includes
CALLER ID.
3.
Press E. The screen display includes AREA
CODES.
4.
Press E. The screen display includes HOME
and the current setting.
5.
Use the dial pad keys to enter your Home Area
Code, then press - to save the setting. The
screen display includes LOCAL 1 and the current
setting. If it is necessary to enter any Local Area
Codes, use the dial pad keys and then press -
to save your entry and scroll to the next Local
Area Code (LOCAL 2, LOCAL 3, and LOCAL 4).
6.
When finished entering all of the area codes
you need to program, press - until the screen
display includes DONE, then press E.
The screen display includes CALL HISTORY.
7.
Proceed to step 5 on page 22 to set the next
feature (Call History).
— OR —
Press and hold E to return to the idle screen.
Turn NEW CALL Light Off
If a NEW CALL light continues to flash when there are no
messages on that line, you may have received a false signal
from your telephone company. You can turn off the light
manually.
1.
Press E to begin feature setup.
2.
Press - until the screen display includes VOICE
MESSAGE.
3.
Press E. The screen display includes L1
COVM ON/OFF.
4.
Press - until the screen display includes LIGHT
OFF and the line number of the light to be turned
off.
5.
Press E to turn the light off for that line.
The screen display includes MAIN MENU.
6.
Press E to return to the main Feature Setup
menu and continue setting up your telephone.
— OR —
Press and hold E to return to the idle screen.
2120
FEATURE SETUP
FEATURE SETUP
FEATURE SETUP
FEATURE SETUP
FEATURE SETUPFEATURE SETUPFEATURE SETUPFEATURE SETUP
To Next Page
Loading...
Need help?
General
