TELEPHONE OPERATION
TELEPHONE OPERATION
TELEPHONE OPERATION
25
Turn Caller ID with Call Waiting
On or Off
If you subscribe to combined Caller ID with Call Waiting
service from your local telephone company, activate
this feature in order to see call information for
Call Waiting calls.
1.
Press E to begin feature setup.
2.
Press - until the screen display includes
CALLER ID.
3.
Press E. The screen display includes AREA
CODES.
4.
Press - until the screen display includes
CID-CALL WAIT and the current setting.
5.
Press < or > to toggle between and
.
6.
When the correct setting is shown, press - or
E to save your choice. The screen display
includes MAIN MENU.
7.
Press E to return to the main Feature Setup
menu and continue setting up your telephone.
— OR —
Press and hold E to return to the idle screen.
Set the Display Language
1.
Press E to begin feature setup.
2.
Press - until the screen display includes
LANGUAGE and the current setting.
3.
Press < or > to scroll through the language
choices (English,Espanol, or
When the desired language is displayed,
press - or E to save the setting.
4.
Press and hold E to return to the idle screen.
24
FEATURE SETUP
FEATURE SETUP
NOTE: When making a call, the telephone uses the
Primary Line programmed (See Set a Primary
Line on page 14). When answering a call, it
automatically selects the ringing line.
Make, Answer or End a Call
NOTES:
Handset
To make a call, lift the handset and dial the call. The
number appears on screen when dialing.
To answer a call, lift the handset.
To override automatic line selection, lift the handset,
then press and release a LINE button.
— OR —
Press the LINE button for the desired line and lift the
handset.
To end the call, replace the handset.
Speakerphone
To make a call, press K. The SPEAKER light goes
on. Wait for a dial tone before dialing the call. The number
appears on screen when dialing.
To answer a call, press K or press the LINE
button of the incoming call, then press K.
To override automatic line selection, press K,
then press and release a LINE button. Dial the call within
five seconds.
— OR —
Press the LINE button for the desired line and
press K. Dial the call within five seconds.
To end a call, press K again.
NOTE: If headset is programmed as the default mode
(see Set Preferred Mode
on page 16), you must press
K to activate the speakerphone.
continued on page 26
❚
❚
❚
❖
❖
❖
❙
❙
❙
❖
❖
❖
❙
❙
❙
To Next Page
Loading...
Need help?
General
