If you have difficulty operating this telephone, try the suggestions below. For
Customer Service, visit our website at www.telephones.att.com
or call 1 (800) 222-3111. Have the serial number (found on the
underside of your telephone base) available when contacting Customer
Service. Please retain your receipt as your proof of purchase.
To purchase accessories or replacement parts contact Customer
Service. Visit our website at www.telephones.att.com or
call 1 (800) 222-3111.
TELEPHONE OPERATION
PROBLEM SOLUTION
No Dial Tone • Make sure all plugs are connected properly.
Inspect the line cord connections at the
modular jack(s) and at the telephone. Also
inspect the coiled handset cord connection
at both ends.
• Check to make sure the phone is not on
hold.
• In the event of a power failure when there
is not a charged 9V battery installed,
Line 2 cannot be used. Use Line 1 to
make your call.
• Unplug the telephone and connect it to
another modular jack. If it still does not
work and other telephones in your home
are working, the problem is with this phone.
PROBLEM SOLUTION
An Error Tone Sounds If you try to exit area code programming
During Area Code without entering a Home Area Code, you
Programming will hear an error tone. Follow the
instructions to Program Home and Local
Area Codes beginning on page 21.
PROBLEM SOLUTION
Call Cannot Be Dialed In the event of a power failure when there
or is Dialed Slowly is not a charged 9V battery installed, Line 2
cannot be used. Use Line 1 todial your call.
55
IN CASE OF DIFFICULTY
IN CASE OF DIFFICULTY
TECHNICAL SPECIFICATIONS
REN 0.1B
Power Adapter AC 120V 60Hz 5W AC9V 300mA
FCC # 6YFTE01B992-01
Weight 2.165 lbs.
Dimensions Length: 8.68 inches
Width: 8.58 inches
Height: 5.1 inches
54
TECHNICAL SPECIFICATIONS
TECHNICAL SPECIFICATIONS
TECHNICAL SPECIFICATIONS IN CASE OF DIFFICULTY
To Next Page
Loading...
Need help?
General
