Store a Pause in a One Touch Entry
You can include a two-second pause while storing a dialing
sequence which requires a pause during actual dialing.
When entering a pause, press P. Each pause
counts as one digit and appears on the screen as P.
Continue storing the number as usual.
Store a Flash in a One Touch Entry
You can store the flash signal required for some special
services as part of a dialing sequence.
When entering a flash signal, press F. Each
flash counts as one digit and appears on screen as F.
Continue storing the number as usual.
Store a Wait in a One Touch Entry
You can include a 30-second wait while storing a dialing
sequence which requires a break during actual dialing.
While you are entering the number to be stored, the
screen display includes WAIT.
Press E when storing the wait. Each wait counts
as one digit and appears on screen as W. Continue
storing the number as usual.
View a One Touch Entry
1.
Press E to enter the feature menu. The screen
display includes ONE TOUCH.
2.
Press E. The screen display includes PROGRAM.
3.
Press - until the screen display includes VIEW.
4.
Press E. The screen displays VIEW on the
top line.
5.
Press the One Touch button. The screen display
includes the number stored in that location.
—OR—
Press W, then the One Touch button for the
entry to be reviewed. The screen display
includes LOWER MEMORY and the number stored
in that location.
6.
Press and hold E to return to the idle screen.
If Auto Speaker is turned off (see Turn Auto Speaker
On or Off on page 14), you can also view the number
stored in a One Touch location while the telephone is on hook
by pressing the button(s) for the number to
be viewed.
Store a Number in a One Touch
Location
NOTE: You can store up to 24 digits in each One
Touch location. If you try to store more than 24 digits,
the screen will briefly display Only 24 digits are
allowed and an error tone will sound.
1.
Press E to enter the feature menu. The
screen display includes ONE TOUCH.
2.
Press E. The screen display includes
PROGRAM.
3.
Press E. The cursor flashes on screen.
4.
Enter the phone number using the dial pad keys.
— OR —
Press R to copy the last number dialed
from this phone to this One Touch location.
The screen will show the number as you enter it.
The first 16 characters appear on the second
line and the next eight on the third line. You
can press < to backspace and delete previous
characters, or > to move ahead and add one
space. Each space counts as one digit and
appears on screen as
-
.
5.
When you are finished entering the number,
choose a One Touch location:
Press the desired One Touch button. The screen
displays the number you entered and Has been
stored.
— OR —
Press l, then press the desired One Touch
button. The screen displays LOWER MEMORY, the
number you entered, and Has been stored.
NOTE: You can exit storing a number any time.
Press - until the screen shows EXIT PROGRAM,then
press E.
— OR —
Press and hold E.
3534
ONE TOUCH OPERATION
ONE TOUCH OPERATION
ONE TOUCH OPERATION
ONE TOUCH OPERATION
❖
❖
❖
❚
❚
❚
◗
◗
◗
To Next Page
Loading...
Need help?
General
