Auto Redial
The telephone can automatically redial the last outgoing
number up to ten times, until the other phone rings or
you cancel Auto Redial. Auto Redial calls are made using
the speakerphone.
1.
While the telephone is on hook, press a.
It dials the number in redial memory using the
Primary Line selected or Automatic Line Selection
if it is turned on. (See Set a Primary Line on
page 14 or Turn Automatic Line Selection
On or Off on page 15.)
— OR —
While the telephone is on hook, press a LINE
button to select a line. Then, press a.
The telephone dials the number in redial memory.
2.
When the other phone rings or the other party
answers, lift the handset, press K
press H to speak with the otherparty.
If the number dialed is busy, the telephone will disconnect.
The telephone will wait 40 seconds and redial the call up
To cancel Auto Redial at anytime, press a
again. Lifting the handset or pressing K or h
while the phone is redialing a call will also cancel the Auto
Redial feature.
Redial
The last number dialed on this telephone (up to 24 digits) is
stored in redial memory until another number is dialed.
Handset
To dial the same number again, lift the handset, listen for
the dial tone, and press R.
Speakerphone or Headset
To dial the same number again, press K or h,
then press R. The telephone automatically dials
the last number using the Primary Line selected. (See Set
a Primary Line on page 14.)
To dial the same number using a specific line, press
K or h, press the desired LINE button, then press
R.
NOTE: There may be a delay before the call is
dialed when using the Redial feature. This is normal.
28
TELEPHONE OPERATION
TELEPHONE OPERATION
29
❚
❚
❚❚
❚
❚
0992_CIB_1ATT_FINAL_022105 2/22/04 4:46 PM Page 28
E
E
K
E
To dial this number on a specific line, press
or h, press a LINE button and then press .
Speakerphone or Headset
To dial the Display Dial number, press K or h,
then press .
Handset
To dial the Display Dial number, lift the handset, listen for
the dial tone, then press .
Display Dial
The Display Dial memory contains either the last incoming
telephone number received on the telephone, the last number
reviewed in Call History, or the last number reviewed in
the Directory, whichever is most recent. It is shown on
line 4 of the display.
To Next Page
Loading...
Need help?
General
