TELEPHONE OPERATION
PROBLEM SOLUTION
• Replace the battery.
PROBLEM SOLUTION
Speakerphone Does If the other person cannot hear you, make
Not Work sure the MUTE light is off.
PROBLEM SOLUTION
in Set Time and Date on page 17
—OR—
If you subscribe to Caller ID service, the time
and date will be reset automatically with the
next incoming call.
TELEPHONE OPERATION
PROBLEM SOLUTION
Difficulty Storing Make sure you are pressing the correct
Numbers in Memory sequence of buttons for storing numbers in
One Touch locations. See ONE TOUCH
OPERATION beginning on page 33.
PROBLEM SOLUTION
Telephone Does • Make sure the ringer volume is not turned
Not Ring off. See Ringer Volume on page 27.
• If there are several other telephones on the
same line, try disconnecting some of the
other telephones. Having too many
telephones connected can also create
problems such as low ringer volume or
impaired sound quality during calls.
PROBLEM SOLUTION
Problems with LINE Make sure all plugs are connected properly.
Lights Inspect the line cord connections at the
modular jack(s) and at the telephone. Also
inspect the coiled handset cord connections
at both ends.
PROBLEM SOLUTION
A NEW CALL Light Make sure you have reviewed all of the new
Flashes calls in call history. If you have reviewed the
entire call history and the NEW CALL light
remains lit but is flashing, your phone may
have received a false signal from your Voice
Mail service provider. If you have no new
Voice Mail messages follow the directions in
Turn NEW CALL Light Off on page 20.
5756
IN CASE OF DIFFICULTY
IN CASE OF DIFFICULTY
IN CASE OF DIFFICULTY
IN CASE OF DIFFICULTY
PROBLEM SOLUTION
This display indicates that a rare memory error
has occurred in the CallHistory. To prevent
this error from interfering with the normal
operation of the telephone, all of the Call
History was removed. Your product should
now operate normally; no action is required.
To Next Page
Loading...
Need help?
General
