AT&T CL81114 - Set Date;Time

Telephone settings
16
Set date/time
If you subscribe to caller ID service, the day, month and time are
set automatically with each incoming call. The year must be set
so that the day of the week can be calculated from the caller ID
information. You can turn off the date and time settings of the
caller ID service and set the date and time manually (see Use
caller ID to automatically set date and time on page 21).
After a power failure or handset registration, the system reminds
you to set the date and time.
To set the date and time manually:
1. Press in idle mode to enter the main menu.
2. Press or to scroll to Set date/time
and then press .
3. Press or to select the month, then
press , or enter the number using
the dialing keys.
4. Press or to select the day, then press
, or enter the number using the
dialing keys.
5. Press or to select the year, or enter
the number using the dialing keys, then press
to move on to set the time.
6. Press or to select the hour, then
press , or enter the number using
the dialing keys.
7. Press or to select the minute, then press
, or enter the number using the dialing keys.
8. Press or to highlight AM or PM, or press 2 for AM
or 7 for PM. Then, press to confirm. There is a
confirmation tone and the screen returns to the previous menu.
SET DATE
MM/DD/YY
SET TIME
HH:MM --
Ringers
>Set date/time
Handset settings