AT&T CL81114 User Manual

Multiple handset use
40
Push-to-talk (PTT)
PTT call to a single handset
1. There are a few ways to begin a PTT call to a
single handset. When the handset is not in use:
If you have two handsets and no other
registered devices, press and hold
.
If you have more than two handsets and/or
cordless headset(s)/speakerphone(s):
w Press on the handset, then
use the dialing keys to enter the destination
handset number.
-OR-
w Press on the handset. PressPress
or to highlight the destination
handset number, then press or
.
The handset shows Connecting to HANDSET X... (HANDSET
represents the handset name, X represents the destination
handset number). When the connection is made, both your and
the destination handset screens display Press and hold [PTT]
to talk.
2. Press and hold . A chirp indicates
your microphone is on. Speak towards the
handset. Your voice is broadcast to the
destination handset.
While you are speaking, your handset shows
PTT To handset: X.
3. Release after speaking. Both handsets beep once
again and the screens show Press and hold [PTT] to talk, then
you can press and hold to continue speaking or
the destination handset can respond (see Answer a PTT call on
page 42).
4. To end the PTT call, press or place the handset in
the telephone base or charger. The handset shows Push to
talk Ended.
•
•
PTT To
handset: X
PUSH TO TALK
>HANDSET X
Connecting to
HANDSET X...
Press and hold
[PTT] to talk

AT&T CL81114 Specifications

General

Brand	AT&T
Model	CL81114
Category	Cordless Telephone
Language	English