AT&T CL81114 - Multiple Handset Use; Handset Locator; Join a Call in Progress

Multiple handset use
35
Multiple handset use
Handset locator
The handset locator feature is useful if you
misplace any handsets.
To start the paging tone:
Press on the telephone
base to start the paging tone on all handsets
for 60 seconds.
NOTE: If you press or on a
handset, the ringer of that handset stops, but the paging
to the rest of the handsets continues.
To stop the paging tone:
Press , , or any
dialing key (0-9, or #) on the
handset(s).
-OR-
Press on the telephone base.
Join a call in progress
When a handset is already on a call and you would like to join the
call, press or on your handset.
To end the call using a handset, press or place the
handset in the telephone base or charger. The call does not end
until all handsets hang up.
NOTE: You can use up to four system handsets at the same time on an
outside call.
•
•
•
**Paging**