Multiple handset use
41
Push-to-talk (PTT)
PTT call to multiple handsets
When there are multiple handsets registered to the phone system,
PTT supports one-to-group calls. PTT supports a maximum of
one-to-four calls when one to five handsets are registered, and
a maximum of one-to-three calls when six or more handsets are
registered. The first four registered handsets will be able to use
this feature. Other handsets can only use PTT for one-to-one calls.
To call multiple handsets:
1. You have three ways to call multiple handsets. When the handset
is not in use:
Press and hold until the handset shows
Connecting to group....
Press . Press or to choose Group.
Press or press and your handset
shows Connecting to group....
Press . Press
followed by # (pound
key). The handset shows Connecting to group....
When the connection is made, both the caller and the
destination parties hear a beep. The speakerphones on all
other handsets automatically activate.
2. You need to press and hold when you want to
speak. Speak towards the handset. Your voice is broadcast to
all handsets.
3. Release after speaking.
4. Any extension can reply (see Answer a PTT call on page 42).
NOTE: After on the handset is released, the PTT call remains
open for a short time. If no one presses on the handset within
ten seconds, the PTT call ends automatically.
•
•
•
To Next Page
Loading...
