Call block
64
About call block
If you have subscribed to caller ID service, you can use the call
block feature to reject certain calls automatically. The call block
list can store up to 20 entries. Automatic call rejection can be
applied to:
Numbers saved into the call block list.
Incoming calls without numbers.
This feature is only available on the cordless
handset.
When a call is blocked, the caller will hear a
simulated busy tone for one ring cycle. The call recipient may pick
up the call during the first ring when there is no caller ID
information. Otherwise, the call is disconnected.
NOTE: The blocked calls are displayed as Blocked call in the caller ID log.
•
•
Blocked call
888-722-7702
To Next Page
Loading...
