Telephone operation
33
Options while on call
>Transfer
Intercom
TRANS�ER TO:
>Handset 2
Phone 0:00:12
6:30
AM
8/06
Blind transfer
While on an outside call, you can transfer the call to a specific
handset or any handset without notifying them.
To transfer an outside call directly without notifying the desired
handset:
1. During the call, press .
2. Press again to choose Transfer.
If you have a two-handset system and no
other registered devices, the outside call is put
on hold and your handset shows Transferring
call.... The other handset rings and shows
Transfer from other handset.
If you have other registered device(s) or
more than two handsets, your screen shows
TRANSFER TO: Use the dialing keys to enterenter
a specific handset number (1-9 for handsets
1-9, followed by 0-2 for handsets
10-12, or followed by # for all
handsets), or pressor press or to scroll to
the desired handset and press
. The outside call is put on hold and your handset screenhe outside call is put on hold and your handset screen
shows Transferring call... or Transferring call to all.... The
other handset rings and shows Transfer from HANDSET X
(HANDSET represents the handset name, X represents the
handset number).
3. To answer the call on the destination handset, press, press
, , or any dialing key (or any dialing key (0-9, or
#). The initiating handset shows The initiating handset shows Call transferred and goes to
idle mode.
•
•