AT&T CL82143 User Manual

13
Telephone settings
Handset settings
Ringer tone
You can choose one of 10 ringer tones.
1. Press
MENU/SELECT in idle mode to enter the main menu.
2. Use
qCID or pDIR to scroll to >Ringers, then press
MENU/SELECT.
3. Press
qCID or pDIR to scroll to >Ringer tone, then press
MENU/SELECT.
4. Press
qCID or pDIR to sample each ringer tone.
5. Press
MENU/SELECT to save your preference. There is a
confirmation tone and the screen returns to the previous menu.
NOTE: If you turn off the ringer volume, you do not hear ringer tone samples.
Set date/time
The answering system announces the day and time of each
message prior to playing it. Before using the answering
system, set the date and time as follows. If you subscribe
to caller ID service, the day, month and time are set
automatically with each incoming call. The year must be
set so that the day of the week can be calculated from the
caller ID information. You can turn off the date and time
settings of the caller ID service and set the date and time
manually (see Use caller ID to automatically set date and
time on page 19).
After a power failure or handset registration, the system
reminds you to set the date and time.
Follow the steps to set the month, day, year and time.
1. When the handset is in idle mode, press
MENU/SELECT to
enter the main menu.
2. Press
qCID or pDIR to scroll to >Set date/time and then press
MENU/SELECT.
3. Press
qCID or pDIR to select the month, then press MENU/SELECT, or enter
the number using the dialing keys.
SET DATE
MM/DD/YY
p
q
SET TIME
HH:MM --
p
q
Ringers
>Set date/time
p
q
> Ringer tone
Ringer volume
p
q
RINGER TONE
> Tone 1
p
q

AT&T CL82143 Specifications

General

Brand	AT&T
Model	CL82143
Category	Cordless Telephone
Language	English