AT&T CL82143 User Manual

15
Telephone settings
Voice language
You can select the voice language (English or French) to be used for the voice
prompts in your answering system or caller ID announce.
1. Press
MENU/SELECT in idle mode to enter the main menu.
2.
Use qCID or pDIR to scroll to >Settings, then press
MENU/SELECT.
3.
Use qCID or pDIR to scroll to >Voice language, then
press MENU/SELECT.
4. Press MENU/SELECT to choose >Answering sys, then
press MENU/SELECT.
-OR-
Use qCID or pDIR to scroll to >Caller ID annc, then press
MENU/SELECT.
5. Press qCID or pDIR to choose >English or >Français,
then press MENU/SELECT to confirm your selection. You
hear a confirmation tone.
Caller ID announce
The caller ID announce feature lets you know who’s calling without having
to look at the display. When you have an incoming call, the handset and/or
base speaks “Call from...” and the name of the caller based on the directory
or caller ID information. If the caller’s name is private or unknown, the phone
number up to the last 11 digits will be spoken. If the caller’s phone number is
also private or unknown, no information will be spoken. By default, the caller
ID announce feature is programmed On.
To turn on/off the caller ID announce on your handset
or base:
1. Press
MENU/SELECT in idle mode to enter the main menu.
2. Use
qCID or pDIR to scroll to >Settings, then press
MENU/SELECT.
3. Use
qCID or pDIR to scroll to >Caller ID annc, then
press MENU/SELECT.
4. Use
qCID or pDIR to highlight the desired option, then
press MENU/SELECT.
Set all On/Off - Change the setting for the base and
all handsets.
Local handset - Change the setting for that
handset only.
Base - Change the setting for the telephone base only.
•
•
•
HS CID ANNOUNCE
>On
p
q
CALLER ID ANNC
>Local handset
p
q
Voice language
>Caller ID annc
p
q
Handset settings
VOICE LANGUAGE
>English
p
q
> Answering sys
Caller ID annc
p
q
>Voice language
Caller ID annc
p
q

AT&T CL82143 Specifications

General

Brand	AT&T
Model	CL82143
Category	Cordless Telephone
Language	English