AT&T CL82143 User Manual

Appendix
78
Handset display screen messages
Screen display messages
No line
There is no telephone line connection.
No answer.
Try again.
The handset(s) you are trying to transfer a call to is out of range,
off hook, or has no power.
Number already
saved
The telephone number you have entered is already in the directory.
Not available
at this time
Someone else is already using the directory or caller ID history.
Other handset
is calling
(for systems with 2 handsets)
The other handset is calling.
Out of range OR No
pwr at base
The telephone base has lost power, or the handset is out
of range.
** Paging **
The cordless handset is paged by the telephone base.
Phone
The handset is on a call.
Place in charger
The battery is very low. The handset should be charged.
Rec mem full
The system recording time is full.
Quiet mode on
QUIET mode is on.
Quiet mode is off
QUIET mode is has been turned off.
Rec mem low
The system recording time is low.
Registering...
Please wait
The handset is registering to the telephone base.
Registration failed
The handset registration is not successful.
Ringer off
The ringer is turned off.
Ringer muted
The ringer is off temporarily while the handset is ringing.
Saved
An entry has been successfully saved in the directory.
Speaker
The handset speakerphone is in use.
To register HS,
see manual.
Screen display before handset registration.
To screen call,
press [SELECT]
Press MENU/SELECT to activate call screening.

AT&T CL82143 Specifications

General

Brand	AT&T
Model	CL82143
Category	Cordless Telephone
Language	English