Multiple handset use
35
PTT call to a group of handsets
When there are multiple handsets registered to the phone system, PTT supports
one-to-group calls. PTT supports a maximum of one-to-four calls when two to
five handsets are registered, and a maximum of one-to-three calls when six or
more handsets are registered. The first four registered handsets will be able to
use this feature. Other handsets can only use PTT for one-to-one calls.
To call a group of handsets:
1. You have three ways to call a group of handsets.
Press and hold PUSH TO TALK when the handset is not in use until your
handset screen shows Connecting to group...
Press PUSH TO TALK when the handset is not in use. Press qCID or
pDIR to choose Group. Press MENU/SELECT or press and hold
PUSH TO TALK until your handset screen shows Connecting to group...
Press PUSH TO TALK when the handset is not in use. Press TONE and
# (pound key). The screen shows Connecting to group...
When the connection is made, both the caller and the destination parties
hear a beep. The speakerphones on all other handsets automatically activate.
2. You need to press and hold PUSH TO TALK when you want to speak.
Speak towards the handset. Your voice broadcasts to all eligible handsets.
3. Release
PUSH TO TALK after speaking.
4.
Any handset can reply (see Answer a PTT call on page 36).
NOTE: After PUSH TO TALK is released, the PTT call remains open for a short time. If no
one presses PUSH TO TALK within 10 seconds, the PTT call ends automatically.
•
•
•
Push-to-talk (PTT)
To Next Page
Loading...
Need help?
General
