Multiple handset use
34
PTT call to a single handset
1. There are a few ways to begin a PTT call to a single
handset. When the handset is not in use:
If you have a two-handset system, press and hold PUSH
TO TALK.
If you have more than two handsets, press PUSH TO
TALK. Use the dialing keys to enter the destination
handset number.
-OR-
Press qCID or pDIR to highlight the destination handset
number and then press MENU/SELECT or PUSH TO TALK.
Your handset screen shows Connecting to HANDSET X...
(X represents
the destination handset number)
for a few seconds. When the connection
is made, both your and the destination handset screens display Press and
hold [PTT] to talk.
2. Press and hold PUSH TO TALK on your handset. A chirp
indicates your microphone is on. Speak towards the
handset. Your voice broadcasts to the destination handset.
While you are speaking, your handset screen shows
PTT To handset: X.
3. Release PUSH TO TALK after speaking. Both handsets beep once again.
After the handsets beep, you can press and hold PUSH TO TALK to
continue speaking or the destination handset can respond (see Answer a
PTT call on the next page).
4. To end the PTT call, press OFF/CANCEL or place the handset in the
telephone base or charger. The handset screen shows Push to talk Ended
for a few seconds.
•
•
Push-to-talk (PTT)
PTT To
handset: X
PUSH TO TALK
>Handset X
p
q
Press and hold
[PTT] to talk
To Next Page
Loading...
Need help?
General
