AT&T CL82143 - AT&T Phone Parts Checklist; AT&T Phone Installation Guide

1
Parts checklist
Your telephone package contains the following items. Save your sales receipt
and original packaging in the event warranty service is necessary.
Abridged user’s manual
Telephone base
Telephone line cord
Power adapter for
telephone base
Wall-mount bracket
BY
1021
BT183342/BT283342
2.4V 400mAh Ni-M
H
Quick start guide
CL82143
DECT 6.0 cordless telephone/
answering system with
caller ID/call waiting
Abridged user’s manual
Cordless handset
Battery for cordless handset Battery compartment cover
Getting started
Telephone base installation
If you have
DSL high-speed
Internet service,
a DSL filter
(not included)
is required. The
DSL filter must
be plugged into
the telephone
wall jack.
This quick start guide provides you with basic instructions only.
For more complete instructions, refer to your Abridged user’s
manual provided in the package, or see the online Complete
user’s manual at www.telephones.att.com/manuals.
Quick start guide
CL82143
Plug the power
cord and telephone
line cord into
the jacks.
Route the
cords through
the slots.
Plug the other
end of the
telephone
line cord into
a telephone
jack or a
DSL filter.
Raise the
antenna.
Caution: Use only the power adapters provided with this product. To obtain a replacement, visit
our website at www.telephones.att.com or call 1 (800) 222-3111.
In Canada, dial 1 (866) 288-4268.
Plug the power
adapter into an
electrical outlet
not controlled by
a wall switch.