AT&T CL82143 User Manual

Directory
39
Create directory entries
Create a new directory entry
1. Press
MENU/SELECT in idle mode to enter the main menu.
2. Press
qCID or pDIR to scroll to >Directory, then press
MENU/SELECT.
3. Press
qCID or pDIR to highlight >Add contact.
4. Press
MENU/SELECT.
5.
Use the dialing keys to enter a telephone number (up to 30
digits) when prompted.
Press qCID or pDIR to move the cursor to the left
or right.
Press MUTE/DELETE to erase a digit.
Press and hold MUTE/DELETE to erase all digits.
Press and hold REDIAL/PAUSE to enter a three-second
dialing pause (a p appears).
-OR-
Copy a number from the redial list by pressing REDIAL/PAUSE,
then qCID or pDIR, or pressing REDIAL/PAUSE repeatedly
to locate the number. Press MENU/SELECT to copy the number.
6. Press
MENU/SELECT to move on to the name. The display
shows Number already saved if the number is already in
the directory. You cannot save the same number twice.
7. Use the dialing keys to enter a name (up to 15 characters)
when prompted. Each time you press a key, the character
on that key appears. Additional key presses produce other
characters on that key. See the chart on the next page.
Press qCID or pDIR to move the cursor to the left
or right.
Press 0 to add a space.
Press MUTE/DELETE to erase a character.
Press and hold MUTE/DELETE to erase all characters.
Press a>A to change the next letter to upper or lower case.
8.
Press MENU/SELECT to store your new directory entry.
There is a confirmation tone and the screen shows Saved.
To change the entry later, see page 44.
NOTE: The first letter of every word is a capital letter. The remaining letters in a word start as
lower case letters, as shown in the chart on the next page.
•
•
•
•
•
•
•
•
•
ENTER NAME
Robert Brown_
Saved
ENTER NUMBER
888-883-2445 _
Review
>Add contact
p
q
Answering sys
>Directory
p
q
Robert Brown
888-883-2445

AT&T CL82143 Specifications

General

Brand	AT&T
Model	CL82143
Category	Cordless Telephone
Language	English