AT&T CL82143 - Dial Mode; Web Address

Telephone settings
20
Handset settings
NOTE: If in the future, your telephone service provider requires you to dial 10 digits to
make a local call (area code plus telephone number), you need to delete your home
area code and dial out locally from the caller ID log. With the home area code displayed,
press and hold MUTE/DELETE until the digits are deleted, and then press MENU/SELECT.
The home area code is now restored to its default setting of _ _ _ (empty).
Dial mode
The dial mode is preset to tone dialing. If you have pulse (rotary) service, you
must change the dial mode to pulse dialing before using the telephone.
To set the dial mode:
1. Press
MENU/SELECT in idle mode to enter the main menu.
2. Use
qCID or pDIR to scroll to >Settings, then press
MENU/SELECT.
3. Use
qCID or pDIR to scroll to >Dial mode, then press
MENU/SELECT.
4. Use
qCID or pDIR to highlight >Touch-tone or >Pulse,
then press MENU/SELECT. The screen shows DIAL MODE is
touch-tone or DIAL MODE is pulse. There is a confirmation
tone and the screen returns to the previous menu.
Web address
Use this feature to view the AT&T website address.
1. Press
MENU/SELECT in idle mode to enter the main menu.
2. Use
qCID or pDIR to scroll to >Web address, then press
MENU/SELECT.
www.telephones.
att.com
Home area code
>Dial mode
p
q
DIAL MODE
>Touch-tone
p
q