19
Telephone settings
Handset settings
Use caller ID to automatically set date and time
Follow the steps to turn the CID time sync feature on or off.
The default setting is On.
1. When the handset is in idle mode, press
MENU/SELECT to
enter the main menu.
2. Press
qCID or pDIR to scroll to >Settings, then press
MENU/SELECT.
3. Press
qCID or pDIR to scroll to >CID time sync, then press
MENU/SELECT.
4. Press
qCID or pDIR to highlight >On or >Off, then press
MENU/SELECT to save. There is a confirmation tone and the screen returns
to the previous menu.
Home area code
If you dial 7 digits to make a local call (no area code required), enter your
area code into the telephone as the home area code. When you receive a call
from within your home area code, the caller ID history only displays the seven
digits of the telephone number.
This feature makes it easy for you to place a call from the caller ID log. If
you dial 10 digits to make a local phone call, do not use this home area code
feature. If you do, you cannot place local calls from your caller ID log, as they
will have only seven digits.
To set the home area code:
1. Press
MENU/SELECT in idle mode to enter the main menu.
2.
Use qCID or pDIR to scroll to >Settings, then press MENU/SELECT.
3.
Use qCID or pDIR to scroll to >Home area code, then
press MENU/SELECT. The screen briefly shows Only for
7digit dial from CID.
4. Use the dialing keys to enter a three-digit home area code.
Press MUTE/DELETE to delete a digit.
Press and hold MUTE/DELETE to delete all digits.
5. Press
MENU/SELECT to save. There is a confirmation tone
and the screen shows Area code will not show in CID
briefly before returning to the previous menu.
•
•
Key tone
>CID time sync
p
q
CID TIME SYNC
>On
p
q
CID time sync
>Home area code
p
q
HOME AREA CODE
___
To Next Page
Loading...
Need help?
General
