AT&T CL82143 User Manual

Telephone operation
27
Options while on calls
Chain dialing
Use this feature to initiate a dialing sequence from the numbers in the directory,
caller ID history or redial memory while you are on a call.
Chain dialing is useful when you wish to access other numbers (such as bank
account numbers or access codes) from the directory, caller ID history or redial list.
To access the directory while on a call:
1. Press
MENU/SELECT.
2.
Press qCID or pDIR to scroll to >Directory and then press
MENU/SELECT.
3. Press
qCID or pDIR to scroll to the desired number.
4. Press
MENU/SELECT to dial the number shown.
To access the caller ID log while on a call:
1. Press
MENU/SELECT.
2. Press
qCID or pDIR to scroll to >Caller ID log, then press
MENU/SELECT.
3. Press
qCID or pDIR to scroll to the desired number.
4. Press
MENU/SELECT to dial the number shown.
To access the redial list while on a call:
1. Press
REDIAL/PAUSE to show the most recently
dialed number.
2. Press
qCID or pDIR to scroll to the desired number, or press
REDIAL/PAUSE repeatedly to show the last 10 recently dialed
numbers. Press MENU/SELECT to dial the number shown.
NOTES:
You cannot edit a directory entry while on a call. For more details about the directory, see
page 38.
You cannot copy a caller ID entry into the directory while on a call. For more details about
the caller ID history, see page 48.
If you press REDIAL/PAUSE while on a call, you can only view the 10 most recently dialed
numbers and you cannot erase the entries. For more details about the redial memory, see
page 24.
Press OFF/CANCEL to exit redial, directory or caller ID history when on a call.
•
•
•
•
REDIAL #1/10
800-360-4121
p
q
>Directory
Intercom
p
q
>Caller ID log
Directory
p
q

AT&T CL82143 Specifications

General

Brand	AT&T
Model	CL82143
Category	Cordless Telephone
Language	English