AT&T SB67108 User Manual

16
Getting started
Handset setup
Line selection
You can select the default telephone line to be used when you make
outgoing calls. This handset comes factory set for Auto selectable
line, which chooses the first available line for making a call. To select
a particular line, choose Line 1, Line 2, Line 3 or Line 4.
When the handset is idle, press MENU/ENTER.
Press DIR or CID to scroll to Handset setup.
Press MENU/ENTER.
Press DIR or CID to scroll to Line selection.
Press MENU/ENTER.
Press DIR or CID to select Auto, Line 1,
Line 2, Line 3 or Line 4.
Press MENU/ENTER to save the setting and return
to the previous menu. There is a confirmation tone. To exit without
making changes, press OFF/CLEAR.
Change handset name
You can create a handset name for each registered handset.
When the handset is idle, press MENU/ENTER.
Press DIR or CID to scroll to Handset setup.
Press MENU/ENTER.
Press DIR or CID to scroll to Handset name.
Press MENU/ENTER.
Change the handset name when prompted.
Press or to move the cursor to the left or
right.
Use the dial pad to enter a name (up to 13
characters). Each time you press a key, a character on that key
appears. Additional key presses produce other characters on that
key. See the chart on page 45.
Press OFF/CLEAR to backspace and delete characters.
Press and hold OFF/CLEAR to delete all characters.
1.
2.
3.
4.
5.
1.
2.
3.
4.
•
•
•
•
Line selection
:Auto
Back
LCD contrast
Key tone
Language
>Line selection
Back
Enter HS name:
Handset 1
Back
Key tone
Language
Line selection
>Handset name
Back

AT&T SB67108 Specifications

General

Type	DECT telephone
Handset type	Wireless handset
Answering machine	Yes
Elderly phone	-
Mounting type	Desk
Product color	Black, Grey
Backlight color	Blue
Headset connectivity	2.5 mm
Phonebook capacity	100 entries
Call log entries	50
Volume control	Touch
Languages support	English
Brand compatibility	AT&T

Weight and Dimensions

Weight	- g