18
Handset operation
Handset setup
Speed dial
The handset has ten speed dial locations where you can store the
phone numbers you wish to dial using two key presses. You can store
up to 32 digits in each location.
Enter, edit or delete a speed dial number
When the handset is idle, press MENU/ENTER.
Press DIR or CID to scroll to
Speed dial setup. Press MENU/ENTER.
Press DIR or CID to choose the desired speed
dial location, then press MENU/ENTER.
Use the dial pad to enter or edit the telephone
number up to 32 digits. If you want to delete the
entry, erase all the digits.
Press or to move the cursor to the left or right.
Press OFF/CLEAR to backspace and delete digits.
Press and hold OFF/CLEAR to delete all digits.
5. Press MENU/ENTER to save the setting and return to the previous
menu. There is a confirmation tone. To exit without making
changes, press OFF/CLEAR.
NOTES:
See page 25 for instructions on calling a speed dial number.
The memory locations for speed dial and the directory are not the same, so setting up
speed dial numbers does not decrease your directory storage space.
Customer support
You can use this feature to view the AT&T website address.
When the handset is idle, press MENU/ENTER.
Press DIR or CID to scroll to Customer support. Press
MENU/ENTER.
To exit, press OFF/CLEAR.
1.
2.
3.
4.
•
•
•
1.
2.
1.
2.
3.
Mailbox setup
Handset setup
COVM
>Speed dial setup
Back
>Speed dial 1
Speed dial 2
Speed dial 3
Speed dial 4
Back
To Next Page
Loading...
Need help?
General
Weight and Dimensions
