Name: AT&T SB67108
Brand: AT&T
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Directory

Create directory entries

Create and store a directory entry

Use the following steps to store a name and number in the directory.

When the handset is idle:

Press MENU/ENTER twice to select Directory.

-OR-

Press DIR to enter the directory.

2. Press the Add softkey to add an entry.

3. Enter or change the telephone number (up to 32 digits) using the

dial pad when prompted.

Press or to move the cursor to the left or

right.

Press OFF/CLEAR on the handset to backspace

and delete characters.

Press and hold OFF/CLEAR on the handset to delete all

characters.

Press REDIAL/PAUSE to enter a three-and-a-half second dialing

pause (see page 45).

Press the Flash softkey to enter a flash (see page 46).

Press the Back softkey to return to the previous screen.

NOTE: If the telephone number in the directory exceeds 16 digits, < appears in front

of the telephone number. Press < to move towards the beginning of the telephone

number or press > to move towards the end of the telephone number.

4. Press MENU/ENTER to save the number.

5. Enter the name when prompted.

Use the keypad to enter a name (up to 16

characters). Each time a key is pressed, the

character on that key appears. Additional key

presses produce other characters on that key. See the chart on

the next page.

•

Other manuals for AT&T SB67108

Questions and Answers:

Need help?

Do you have a question about the AT&T SB67108 and is the answer not in the manual?

General