AT&T SB67108 - Handset Operation; Basic Call Handling

25
Handset basic operation
Making a call
To make a call:
Press PHONE/FLASH or SPKR.
-OR-
To override automatic line selection, press the
L 1-L 4 key for the desired line.
2. Enter the telephone number. The screen displays the elapsed time
as you talk (in hours, minutes and seconds).
To end a call:
Press OFF/CLEAR.
NOTE: Pressing PHONE/FLASH to access services from your telephone service
provider does not affect the elapsed time.
On-hook dialing (predialing)
Enter the telephone number. Press OFF/CLEAR to make
corrections when entering the telephone number.
Press PHONE/FLASH or SPKR to dial.
-OR-
Press the L 1-L 4 key for the desired line.
Using the speakerphone
During a call, press SPKR to switch between hands-free
speakerphone and normal handset use. Press OFF/CLEAR to hang
up.
Calling a speed dial number
Press and hold a dial pad key (1-0) to display the speed dial
number.
1.
1.
2.
1.
Line1 00:01:15
L1
Elapsed time
Handset operation