AT&T SynJ SB67158 - Voice Language

Getting started
Mailbox setup (for general mailbox)
37
Call alert confirmation:
You can confirm whether the system can successfully call the alert number
that you entered.
Press or to scroll to Calling alert #. Press MENU/ENTER.
The screen displays Press SPKR to confirm the alert call.
Press SPEAKER on the telephone base. You should
hear the telephone number being dialed. To exit without
making changes, press EXIT.
After confirming that the call went to the telephone
number you specified, press SPEAKER again to end
the test. The screen returns to idle mode.
NOTES:
If you turn on Notify alert before you enter the alert number, Please set
the alert #. appears on the screen.
The called telephone hears silence when the system calls the alert number.
To initiate a call alert call again, do the first three steps of the Call alert confirmation section (above).
1.
2.
3.
4.
1.
2.
3.
Alert call #
Alert on/off
Calling alert #
>
Press SPKR to
confirm the
alert call
Calling alert #
Voice language
You can select a language (English, Spanish or French) to be used for the
voice prompts in the answering system.
When the telephone is idle, press MENU/ENTER.
Press or to scroll to Mailbox setup. Press
MENU/ENTER.
Press or to scroll to Voice language. Press
MENU/ENTER.
Press or to select English, Español or Français.
Press MENU/ENTER again to save the setting and return
to the previous menu. There is a confirmation tone.
To exit without making changes, press EXIT.
1.
2.
3.
4.
5.
Language
:English
ENTER=Save
Persistent hold
Notify alert
Voice language
Remaining space
>