Join a call in progress
Use this feature to join in an ongoing call on any line that
does not have call privacy set (see Call privacy on page
48 for more information). The corresponding line icon
appears on the screen when the line is in use.
Press and hold the desired LINE 1-LINE 4 on the
telephone base to join in the call, which becomes a
three-way conference (page 51).
NOTE: When you try to join an ongoing call on a line with call
privacy on, the screen displays Privacy and you hear four beep tones.
Chain dialing
While you are on a call, you can initiate a dialing
sequence from the numbers in the directory.
Chain dialing can be useful if you wish to access other
numbers (such as bank account numbers or access
codes) from the directory.
To access the directory while on a call:
During the call, press DIR, then press or to reviewto reviewreview
the directory.
To dial the displayed number, press MENU/ENTER. To
exit without making changes, press EXIT or REP andand
continue with the conversation.
NOTE: You cannot edit a directory entry while on a call. See page 65 for more details
about the directory.
Three-way conference calls
Use this feature to set up a three-party call by using two lines at the same
time. You can also join an intercom call with a call on an outside line. The
outside line call must be established first because an intercom call cannot be
placed on hold.
•
1.
2.
Telephone base operation
Options while on calls
51
Conf. 00:00:29
L3 H2
1
Privacy
1
CHRISTINE SMITH
8887227702
ENTER=Call
Line1 00:16:30
88324458887227702
To Next Page
Loading...
