Answering system
Answering system operation
82
Play back a memo
Play memos the same way as normal messages (see Message playback on
page 78).
Set answering system to play announcement only
When the telephone is idle, press ANSWER ON for the
desired line.
Press MENU/ENTER. The current Announce only
announcement plays. The screen displays Annc only ON
Play announcement, and then it returns to the
idle screen.
-OR-
To exit without making changes, press EXIT.
NOTES:
1. The default announcement is “Hello. No one is available to answer your call. Thank you for
calling.”
2. While previewing the announcement, you can adjust the volume by pressing VOL+ or VOL-. If you
do not want to hear the announcement, press EXIT.
Set general delivery mailbox to not answer
When the telephone is idle, press ANSWER ON for the desired line.
Press or to scroll to No answer. Press MENU/ENTER.
Disable the answering system
When the telephone is idle, press ANSWER ON for the desired line to
disable.
Press or to scroll to No answer. Press
MENU/ENTER to prevent the answering machine
from answering calls on that line.
-OR-
To exit without making changes, press EXIT.
1.
2.
1.
2.
1.
2.
Ans->Gen MB only
Ans->Auto att
Ans->Annc only
No answer
>
Annc only ON
Play announcement
00:04
*:Base
3 Missed calls
11:30PM 12/31
Annc
To Next Page
Loading...
