AT&T SynJ SB67158 - Answering a Call; Temporary Ringer Silencing; Last Number Redialing

Telephone base operation
Telephone base basic operation
46
Last number redialing
The last 10 telephone numbers dialed (up to 32 digits) are stored in system memory.
To view the 10 most recently dialed numbers:
1. Press PAUSE/REDIAL to enter the redial list and
display the most recently called number.
2. Press or , or press PAUSE/REDIAL repeatedly to
view other recently called numbers.
3. Press EXIT to exit the redial list.
To redial a number:
To dial the displayed number, lift the handset, orlift the handset, or
press SPEAKER or HEADSET.
To override automatic line selection, press LINE 1-LINE 4
for the desired line, then lift the handset.
To edit a number:
While the desired number displays, press MENU/ENTER to enter editing mode.
Press REP or SKIP to move the cursor to the left or right.
Press REMOVE to backspace and delete a digit.
Press PAUSE/REDIAL to enter a 3.5 seconds dialing3.5 seconds dialingdialing
pause (a P appears) (page 62).
Press FLASH to enter a flash (page 62).
To delete a number:
While the screen displays the desired number, press
REMOVE to delete the number from the redial memory.
•
•
•
•
•
•
•
Answering a call
To answer a call:
Lift the handset, press SPEAKER, HEADSET or the
ON/OFF button on a registered cordless headset.
-OR-
To override automatic line selection, press LINE 1-LINE 4 for the desired
line, then lift the handset.
Temporary ringer silencing
Press MUTE while the telephone is ringing to silence the ringer temporarily
on the telephone base only. This turns off the ringer without disconnecting
the call. The next incoming call rings normally at the preset volume.
•
8888832445
Line1
8888832445
8888832445
Deleted