ATEL V810 Series
V810A Data User Manual
V6.1, January 3, 2023
from the network available list and re-connect again when the V810A SSID reappears.
8. Why can’t I access the https://192.168.0.1?
If you can’t access the Online Portal at https://192.168.0.1, check the following:
a) Ensure the correct URL, https://192.168.0.1, is entered or try http://192.168.0.1
b) Ensure your device is connected to your V810A Wi-Fi with the correct Wi-Fi name
(SSID) and password.
The default password for the Online Portal can be found on the device label as well
as the LCD screen display menu. If you have forgotten the password you created,
you will need to do a factory reset to restore the default settings on your V810A by
long pressing the RESET pinhole.
9. How can I manage my device?
There are three ways to manage your V810A device:
1. WebGUI (Local Online Device Management Portal)
a. Connect your PC and V810A device using WiFi from the device, ethernet
cable or USB-C cable.
b. Using your Web Browser, visit 192.168.0.1
c. Log in to the WebGUI. Your Username is ‘admin’ and password can be
found on the LCD display or on the device label on the bottom of the device
(under the battery cover).
d. Once you’ve logged in, you can manage the device.
2. ARMS (Remote Device Management)
a. Using a PC with Internet access (not necessarily the internet provided by
the device which is being managed), visit https://dm.a-tracs.com
b. Yo u c a n s e l e c t ‘ c r e a t e a c c o u n t ’, t h e n r e g i s t e r f o r a “ G e n e r a l ” a c c o u n t . Yo u
will need to provide your email, a device IMEI and SN. The device shouldn’t
have been managed by anyone else in ARMS or the APP already. If you
have already got your account registered through the APP, you can use the
same credentials to log in.
c. Yo u c a n r e g i s t e r w i t h a n “A d m i n ” a c c o u n t w i t h o u t t h e d e v i c e i n f or m a t i o n
(note that you must have an agreement ready with ATEL first.) Admin
accounts can manage all the devices ATEL preload for you.
d. The registered account can be used to log-in to ARMS and the APP.
e. Log into your account. You can view your device there.
f. Power on the device (make sure it connects to Internet).
g. Once connected to the Internet, you can see your device is shown ‘online’
in the ARMS portal.
h. Yo u c a n m a n a g e y o u r d e v i c e n o w. Yo u ca n u s e t h e m e n u b u t t o n t o r e f r e s h
the status, delete the device, configure the device, tag (name) it, give it an
address, share the device management with another person using his/her
email, and import more devices either one by one or in batch.
To Next Page
Loading...
