ATEL V810 Series
V810A and V810AD Data User Manual
V6.9, July 17, 2023
! VPN Passthrough
After being turned on, VPN Passthrough allows connected devices to establish a VPN
tunnel.
! IPv6 Transparent Mode
Transparent mode allows connected devices to be accessible from the Internet.
! DMZ (Ipv4)
Enter the IP address of the connected device in the Destination IP address input field for
it to become the DMZ destination. After enabling the DMZ feature, all the applications of
the connected device will be visited.
! Allow Ping From WAN
Yo u c an c o n f i g u r e t h e d e v i c e t o “Allow Ping From WAN” and set up a white IP address list.
Note: Even if the device is configured as “Allow Ping From WAN”, you may not be able to
ping the device due to network policy of the mobile carriers.
To Next Page
Loading...
