CS1782
A
/ CS1784
A
User Manual
16
Mouse Port Switching
The CS1782
A
/ CS1784
A
supports the very latest in mouse port-switching –
simply double-click the scroll wheel of your USB mouse to cycle through the
ports.
Note: 1. This featured is only supported by USB 3-key scroll wheel mice.
2. The default setting is disabled.
3. This feature is only supported when Mouse Emulation is enabled. See
Mouse Emulation Control, page 30, for details.
Hot Plugging
The CS1782
A
/ CS1784
A
supports USB hot plugging – components can be
removed and added back into the installation by unplugging their cables from
the USB hub ports without the need to shut the unit down.
Powering Off and Restarting
If it becomes necessary to Power Off the CS1782
A
/ CS1784
A
unit, before
starting it back up you must do the following:
1. Shut down all the computers that are attached to the switch.
2. Unplug the switch’s power adapter cable.
3. Wait 10 seconds, then plug the switch’s power adapter cable back in.
4. After the switch is up, Power On the computers.
cs1782a-1784a.book Page 16 Monday, July 19, 2021 4:50 PM
To Next Page
Loading...
Need help?
General
