CS1782A / CS1784A User Manual
30
Mouse Emulation Control
The default setting is enabled. To disable, do the following:
1. Invoke HSM (see page 25
).
2. Press [M].
This procedure is a toggle. Repeat to enable.
Mouse Port-switching
The Mouse Port-switching function can be enabled or disabled. The default
setting is disabled. To enable, do the following:
1. Invoke HSM (see page 25).
2. Press [W].
This procedure is a toggle. Repeat to disable.
Note: This feature is only supported by USB 3-key scroll wheel mice. The
default setting is OFF. This feature is only supported when mouse
emulation is also enabled. See Mouse Emulation Control, above.
Keyboard Emulation Control
Console keyboard port emulation/bypass feature supports most gaming/
multimedia keyboards. The default setting is enabled. To disable, do the
following:
1. Invoke HSM (see page 25).
2. Press [N].
3. This procedure is a toggle. Repeat to enable.
Note: When keyboard emulation is disabled, the [M], [W], [F2], [F3], [F4],
[F5], [F6], and [F10] are disabled. See page 32, for details.
SPC Mode
To set the keyboard/mouse to use SPC mode so that it can work under special
operating systems as a standard (104 key) keyboard/mouse, do the following:
1. Invoke HSM (see page 25).
2. Press [F1].
cs1782a-1784a.book Page 30 Monday, July 19, 2021 4:50 PM
To Next Page
Loading...
Need help?
General
