Chapter 4. Hotkey Operation
27
Keyboard Operating Platform
The CS1782
A
/ CS1784
A
’s default port configuration is for a PC compatible
keyboard operating platform. If your console uses a PC compatible keyboard
and you have a Mac attached to a port, for example, you can change the port’s
keyboard operating platform configuration so that the PC compatible keyboard
emulates the Mac keyboard. The procedure is as follows:
1. Bring the KVM focus to the port you want to set.
2. Invoke HSM (see page 25)
3. Press and release the appropriate Function key (see table below). After
completing this procedure, you automatically exit HSM.
Note: To set the keyboard language, see Keyboard Language, page 28.
List Switch Settings
To see a listing of the current switch settings, do the following:
1. Open a text editor or word processor and place the cursor in the page
window.
2. Invoke HSM (see page 25).
3. Press and release [F4] to display the settings.
Function Key Operation
[F2]
Enables Mac keyboard emulation, see Mac Keyboard,
page 35 for details.
[F3] Enables Sun keyboard emulation, see Sun Keyboard,
page 36 details.
[F10] Auto detects the keyboard operating platform (for PC
compatible systems). Activates Pass Through keyboard
mode (keystrokes are sent directly to the computer
instead of through the Mac or Sun emulator).
cs1782a-1784a.book Page 27 Monday, July 19, 2021 4:50 PM
To Next Page
Loading...
Need help?
General
