CS62KM User Manual
12
Hotkey Setting Mode
Hotkey Setting Mode is used to configure the CS62KM. All operations begin
with invoking Hotkey Setting Mode (HSM).
Invoking HSM
To invoke HSM, do the following:
1. Press and hold down the [Num Lock] key.
2. Press and release the [-] key.
3. Release the [Num Lock] key.
Note: 1. There is an alternate key combination to invoke HSM. See below
for details.
2. The [-] must be released within one half-second, otherwise
Hotkey invocation is canceled.
When HSM is active, the Caps Lock and Scroll Lock LEDs flash in succession.
They stop flashing and revert to normal status when you exit HSM.
Ordinary keyboard and mouse functions are suspended – only Hotkey-
compliant keystrokes and mouse clicks, described in the sections that follow,
can be input.
At the conclusion of some hotkey operations, you automatically exit Hotkey
mode. With some operations, you must exit manually.
To exit HSM manually, press the [Esc] key, or the [Spacebar].
To Next Page
Loading...
Need help?
General
