Chapter 4. Hotkey Operation
13
Alternate HSM Invocation Keys
An alternate set of HSM invocation keys is provided in case the default set
conflicts with programs running on the computers.
To switch to the alternate HSM invocation set, do the following:
1. Invoke HSM (see page 12).
2. Press and release [H].
The HSM invocation keys become the [Ctrl] key (instead of the [Num
Lock] key) and [F12] key (instead of the [-] key).
Note: This procedure is a toggle between the tow methods. To revert back
to the original HSM invocation keys, invoke HSM, then press and
release the [H] key again.
Alternate Port Switching Keys
The port switching activation keys can be changed from tapping the [Scroll
Lock] key twice to tapping the [Ctrl] key twice.
To change the port switching activation keys, do the following:
1. Invoke HSM (see page 12).
2. Press and release the [T].
Note: This procedure is a toggle between the two methods. To revert back
to the original [Scroll Lock] [Scroll Lock] method, invoke HSM,
then press and release the [T] key again.
To Next Page
Loading...
Need help?
General
