CS62KM User Manual
16
Power on Detection
With Power on Detection, if the focus computer is powered off, the switch will
automatically switch to the next powered-on computer. Power on Detection
can be enabled or disabled. The default setting is enabled. To disable Power on
Detection, do the following:
1. Invoke HSM (see page 12
).
2. Press and release [E].
Note: This procedure is a toggle. To enable / disable the Power on
Detection, repeat step 1 and 2.
Mouse Emulation
To enable or disable to toggle between mouse emulation, do the following:
1. Invoke HSM (see page 12
).
2. Press [M].
Note: This procedure is a toggle. To enable / disable the Mouse Emulation,
repeat step 1 and 2.
Mouse Port Switching
Mouse Port Switching allows you to use the mouse wheel button (clicked
twice) to switch ports. For Mouse Port Switching to work, Mouse Emulation
(above) must be enabled. To enable or disable mouse port switching, do the
following:
1. Invoke HSM (see page 12
).
2. Press [W].
Note: 1. This feature is only supported by USB 3-key scroll wheel mice.
The default setting is disabled. This feature is only supported
when mouse emulation is also enabled. See Power on Detection,
above.
2. This procedure is a toggle. To enable / disable the Mouse Port
Switching, repeat step 1 and 2.
To Next Page
Loading...
Need help?
General
