CS62KM User Manual
14
Keyboard Operating Platform
The CS62KM’s default port configuration is for a PC compatible keyboard
operating platform. To set the keyboard operating platform to work under
special operating system as a standard (104 key) keyboard, or automatically
detect and set the keyboard operating platform, follow the steps below:
1. Bring the KM focus to the port you want to set.
2. Invoke HSM (see page 12).
3. Press and release the Function key (see table below). After completing this
procedure, you automatically exit HSM.
List Switch Settings
To see a listing of the current switch settings, do the following:
1. Open a text editor or word processor and place the cursor in the page
window.
2. Invoke HSM (see page 12).
3. Press and release [F4] to display the settings.
USB Reset
If the USB loses focus and needs to be reset, do the following:
1. Invoke HSM (see page 12).
2. Press and release [F5].
Function Key Operation
[F1] Sets the SPC mode so that it can work under special operating
system as a standard (104 key) keyboard.
[F10] Automatically detects and sets the keyboard operating platform.