ATEQ TPMS - Page 97

97
For each wheel, the following instructions are displayed in succession on the line
corresponding to the wheel being checked:
• WAITING OUTER
• MEASURE PROCESSING
• RELEASE
• WAITING CENTER
• MEASURE PROCESSING
• RELEASE
• WAITING INNER
• MEASURE PROCESSING
• RELEASE
For each new
wheel, press
the button on
the Tire Tread
Depth gauge
accessory to
begin
measurement.
When all the wheels have been checked, all the measurements taken are displayed.
Measurements
in green are
higher than
the legal
minimum.
Measurements
in orange are
near the legal
minimum.
Measurements
in red are
below the
legal
minimum.
= back